Views: 0 Author: Site Editor Publish Time: 2025-04-30 Origin: Site
Blot the liquid with a dry microfiber cloth to absorb as much as possible.
Wipe the area with a damp cloth dipped in mild dish soap and warm water .
Dry the surface thoroughly with a clean cloth to prevent water spots.
Avoid harsh chemicals: Skip ammonia-based window cleaners or bleach, as they can leave a waxy film or cause discoloration .
Use gentle solutions: Mix 1 part vinegar with 3 parts water for a natural disinfectant, or opt for UL Greenguard Gold-certified cleaners like Corian’s recommended formulas .
Wipe in circular motions: This ensures even cleaning and minimizes streaks.
Baking soda paste: Mix baking soda with water to form a thick paste. Apply it to the stain, let it sit for 10–15 minutes, then rinse and dry.
Hydrogen peroxide: For stubborn stains, dab 3% hydrogen peroxide on the area with a cloth and let it dry naturally .
Dish soap: Apply a small amount of degreasing dish soap (e.g., Dawn) directly to the stain. Scrub gently with a soft-bristle brush, then rinse.
Cornstarch: Sprinkle cornstarch over the stain, let it absorb the oil for 1–2 hours, then wipe away.
Viakal gel: Recommended by Corian, apply the gel to the affected area, leave it for 2–4 minutes, and wipe off with a damp cloth .
Lemon juice: Squeeze fresh lemon juice onto the stain, let it sit for 5 minutes, then rinse.
Isopropyl alcohol: Dampen a cloth with 70% alcohol and blot the stain. Avoid rubbing, as this may spread the ink.
Magic eraser: Gently rub the stain with a magic eraser to lift the pigment .
Light scratches: Use a non-abrasive scrub pad (e.g., Scotch-Brite) or automotive polishing compound to buff out marks .
Deep scratches: Sand the area with 800-grit sandpaper, followed by 1200-grit for a smooth finish. Finish with a polishing compound to restore shine .
Bleach solution: Mix 1 tablespoon of bleach with 1 gallon of water. Apply it with a cloth, let it sit for 10 minutes, then rinse .
UV-C sanitizers: Emerging in 2025, handheld UV-C devices offer chemical-free disinfection for high-touch areas .
Avoid these cleaners: Abrasive powders (e.g., Comet), oven cleaners, acetone-based nail polish removers, and acidic drain cleaners .
Never cut directly on the surface: Use cutting boards to prevent scratches.
Don’t place hot items directly on the countertop: Use trivets or heat-resistant pads to avoid warping .
Water-based cleaners: Brands like Durat now offer plant-based, biodegradable formulas that align with circular economy goals .
Microfiber cloths: Recyclable and highly absorbent, they reduce waste compared to paper towels.
Electric spin scrubbers: Cordless devices like the Leebein Spin Scrubber (2025’s top pick) tackle grout and stains with minimal effort .
AI-powered stain detectors: Emerging technologies can analyze stains and recommend the best cleaning method.
DIY repair kits: Companies like Kingkonree sell scratch-repair kits with color-matched resins for easy fixes .
Recycled materials: Some brands now use post-consumer waste in their countertops, reducing environmental impact.
Corian: Use Viakal gel for hard water stains and avoid acidic cleaners .
Wilsonart: Opt for mild soap solutions and never use bleach on matte finishes .
Hi-Macs: For deep scratches, consult a professional to refinish high-gloss surfaces.
